Delivery Included
1 Year Warranty
The Castle M-CC060-0062-00 1512-1800kV sensored brushless motor for 1/8 scale vehicles is engineered for high-torque, precision-controlled performance across demanding off-road and short course platforms. Built with a rugged 4-pole, 12-slot inrunner architecture, this motor delivers consistent torque, smooth startups, and efficient thermal management for vehicles up to 9lbs running on 6S LiPo. With SmartSense™ and QuietSense™ technologies integrated, the Castle M-CC060-0062-00 4-pole motor with SmartSense and QuietSense technology offers sensor-driven accuracy at launch and seamless transitions to sensorless operation, ensuring optimal timing and power delivery across all driving phases.
Key features of the Castle M-CC060-0062-00 1512-1800kV motor
- SmartSense startup – delivers cog-free launches and torque-rich low-speed control
- QuietSense synchronization – maintains ESC-motor sync for smoother transitions
- Kevlar-wrapped rotor – reinforced for durability under high RPM stress
- 180°C neodymium magnets – resist thermal degradation during extended runs
- ROAR sensor port – ensures compatibility with race-legal ESCs
- Rebuildable architecture – allows rotor, shaft, and bearing replacement
How does SmartSense™ improve launch precision for 6S builds?
The Castle M-CC060-0062-00 sensored inrunner motor with 5mm shaft and 6.5mm bullet connectors uses SmartSense™ to initiate motion with sensor-based rotor alignment, eliminating startup hesitation and delivering immediate torque. Once in motion, the motor transitions to Castle’s ultra-efficient sensorless mode, where timing is electronically optimized for each phase and load condition. This dynamic timing adjustment ensures consistent torque output and throttle response, making the motor ideal for 1/8 scale off-road vehicles and 1/10 SCT builds that require controlled acceleration and reliable low-speed drivability.
What makes QuietSense™ essential for off-road stability?
The Castle M-CC060-0062-00 with 180°C magnets and Kevlar-wrapped rotor incorporates QuietSense™ technology to suppress magnetic field noise generated by motor coils. This shielding effect maintains clean signal communication between the motor and ESC, preventing desynchronization during rapid throttle changes or terrain-induced jolts. For off-road platforms operating in unpredictable conditions, QuietSense™ ensures smoother transitions and more predictable handling, especially during aggressive driving or competitive racing.
Why is the Kevlar-wrapped rotor critical for durability?
The rotor in the Castle 1512 motor with ROAR sensor port and CNC aluminum heatsink can is reinforced with Kevlar to withstand the extreme centrifugal forces generated during high-RPM operation. This structural integrity is vital for vehicles up to 9lbs running on 6S LiPo, where torque demands and rotational stress are significantly higher. Combined with hardened stainless steel shafts and oversized NMB bearings, the Kevlar wrap ensures long-term reliability and vibration-free operation, even under heavy loads and extended runtime conditions.
How does the CNC aluminum can enhance thermal performance?
The Castle 1800kV motor with oversized bearings and high-purity copper windings features a CNC-machined 6061-T6 billet aluminum heatsink can that acts as a passive cooling system. This material promotes efficient heat dissipation from the motor’s internal components, helping to maintain optimal operating temperatures during high-load scenarios. The 60.2mm can length and finned 41.78mm diameter further support thermal stability, making the motor suitable for 6S off-road builds that demand sustained torque and power without overheating.
Is the Castle M-CC060-0062-00 motor suitable for heavy-duty off-road and SCT platforms?
Absolutely. The Castle M-CC060-0062-00 1512-1800kV sensored brushless motor for 1/8 scale vehicles is optimized for platforms up to 9lbs, including 1/8 off-road and 1/10 4WD short course trucks. Its 1800kV rating delivers controlled acceleration and top-end speed, while the sensored architecture ensures clean launches and consistent torque delivery. The ROAR-compliant sensor port makes it compatible with race-legal ESCs, and the rebuildable design allows users to maintain peak performance over time. Whether you're bashing through rough terrain or competing on track, this motor provides the control and power needed to excel.
What makes this motor the best Castle upgrade for torque-heavy setups?
The Castle M-CC060-0062-00 sensored inrunner motor with 5mm shaft and 6.5mm bullet connectors combines advanced materials, intelligent timing control, and precision engineering to deliver a performance-focused solution for 6S platforms. Its 4-pole, 12-slot configuration enhances torque and startup smoothness, while the high-purity copper windings and low-resistance gold-plated connectors ensure efficient power delivery. Every component is optimized for torque-heavy setups and smooth throttle modulation, making this motor the best Castle upgrade for torque-heavy setups up to 9lbs with smooth startup control.
For RC enthusiasts seeking a sensored motor with rebuildable architecture and advanced timing control, the affordable Castle 1512-1800kV motor with rebuildable design and SmartSense timing offers unmatched value and performance. Buy Castle M-CC060-0062-00 sensored motor for 6S LiPo 1/8 off-road and 1/10 SCT builds today.
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
