Delivery Included
1 Year Warranty
The E-flite P-EFLA1060B 60A Brushless ESC V2 with switch-mode 5V BEC and EC3 connector is a lightweight, high-efficiency controller designed for sport, scale, and aerobatic electric aircraft. With support for 3–6S LiPo and 9–18 cell NiMH/NiCd packs, this ESC delivers 60A continuous current and up to 75A burst, making it ideal for .40–.60 size planes and mid-size helis. Its integrated switch-mode BEC powers up to seven analog or six digital servos, eliminating the need for a separate receiver battery and simplifying onboard power delivery.
Key features of the E-flite P-EFLA1060B 60A Brushless ESC
- 60A continuous current – supports high-output brushless motors for sport and scale aircraft
- 75A burst current – handles peak loads during aggressive flight maneuvers
- Switch-mode BEC – delivers 5V @ 5A continuous / 8A peak for multi-servo setups
- Programmable features – includes braking, soft start, throttle range, and five timing profiles
- Safe power-arm mode – prevents accidental motor starts during setup
- Auto shutdown – protects motor and electronics in case of signal loss or interference
- Finned heat sinks – support thermal management under sustained load
How does the E-flite P-EFLA1060B support multi-servo aircraft?
The E-flite brushless ESC with 13 AWG leads, 3.5mm bullets, and multi-servo support includes a robust switch-mode BEC capable of powering stabilization systems and multiple servos. This makes it ideal for aircraft with retracts, flaps, or cyclic-intensive heli setups. The integrated BEC reduces weight and complexity by removing the need for a separate receiver battery.
What makes this ESC suitable for both planes and helicopters?
The E-flite P-EFLA1060B with programmable braking, soft start, and 5 timing profiles features selectable throttle input ranges and startup rates tailored for fixed-wing and rotorcraft applications. Whether you're flying a Carbon-Z Cub SS or a Cessna 150, this ESC offers smooth throttle response and reliable performance across a wide range of brushless motors.
Is this ESC reliable for high-performance flying?
Absolutely. The best programmable ESC with 5V switch-mode BEC, EC3 input, and 75A burst rating is built for demanding flight profiles. Its thermal management system includes finned heat sinks to dissipate heat during extended operation, while safety features like auto shutdown and safe power-arm mode protect both pilot and aircraft. With EC3 input and 3.5mm bullet motor leads, installation is secure and straightforward.
Buy E-flite P-EFLA1060B 60A ESC for sport, scale, and aerobatic electric aircraft.
Product Description of E-flite P-EFLA1060B 60A Brushless ESC V2 with switch-mode 5V BEC and EC3 connector
The E-flite P-EFLA1060B 60A Brushless ESC V2 with switch-mode 5V BEC and EC3 connector is a lightweight, high-efficiency controller designed for sport, scale, and aerobatic electric aircraft. With support for 3–6S LiPo and 9–18 cell NiMH/NiCd packs, this ESC delivers 60A continuous current and up to 75A burst, making it ideal for .40–.60 size planes and mid-size helis. Its integrated switch-mode BEC powers up to seven analog or six digital servos, eliminating the need for a separate receiver battery and simplifying onboard power delivery.
Key features of the E-flite P-EFLA1060B 60A Brushless ESC
- 60A continuous current – supports high-output brushless motors for sport and scale aircraft
- 75A burst current – handles peak loads during aggressive flight maneuvers
- Switch-mode BEC – delivers 5V @ 5A continuous / 8A peak for multi-servo setups
- Programmable features – includes braking, soft start, throttle range, and five timing profiles
- Safe power-arm mode – prevents accidental motor starts during setup
- Auto shutdown – protects motor and electronics in case of signal loss or interference
- Finned heat sinks – support thermal management under sustained load
How does the E-flite P-EFLA1060B support multi-servo aircraft?
The E-flite brushless ESC with 13 AWG leads, 3.5mm bullets, and multi-servo support includes a robust switch-mode BEC capable of powering stabilization systems and multiple servos. This makes it ideal for aircraft with retracts, flaps, or cyclic-intensive heli setups. The integrated BEC reduces weight and complexity by removing the need for a separate receiver battery.
What makes this ESC suitable for both planes and helicopters?
The E-flite P-EFLA1060B with programmable braking, soft start, and 5 timing profiles features selectable throttle input ranges and startup rates tailored for fixed-wing and rotorcraft applications. Whether you're flying a Carbon-Z Cub SS or a Cessna 150, this ESC offers smooth throttle response and reliable performance across a wide range of brushless motors.
Is this ESC reliable for high-performance flying?
Absolutely. The best programmable ESC with 5V switch-mode BEC, EC3 input, and 75A burst rating is built for demanding flight profiles. Its thermal management system includes finned heat sinks to dissipate heat during extended operation, while safety features like auto shutdown and safe power-arm mode protect both pilot and aircraft. With EC3 input and 3.5mm bullet motor leads, installation is secure and straightforward.
Buy E-flite P-EFLA1060B 60A ESC for sport, scale, and aerobatic electric aircraft.
Technical Specifications of E-flite P-EFLA1060B 60A Brushless ESC V2 with switch-mode 5V BEC and EC3 connector
Brand, Model and Product Type
- Brand: E-flite
- Model: P-EFLA1060B
- Product Type: E-flite P-EFLA1060B 60A Brushless ESC V2 with switch-mode 5V BEC and EC3 connector, E-flite P-EFLA1060B programmable ESC for 3–6S LiPo aircraft with 75A burst current, E-flite P-EFLA1060B ESC with 13 AWG wiring, 3.5mm bullets, and multi-servo BEC support
Dimensions and Build
- ESC Type: Brushless – Sensorless
- Housing: Finned aluminum heat sinks – supports thermal dissipation
- Operating Modes: Airplane and helicopter – optimized for fixed-wing and rotorcraft
Electrical and Performance Specifications
- Continuous Current Rating: 60A – supports high-output brushless motors
- Burst Current: 75A (15 seconds) – handles peak loads during aggressive flight
- Input Voltage Range: 3–6S LiPo or 9–18 cell NiMH/NiCd – flexible power compatibility
BEC Specifications
- BEC Type: Switch-mode – efficient onboard voltage regulation
- BEC Output: 5V @ 5A continuous / 8A peak – powers up to 7 analog or 6 digital servos
Drive and Control Features
- Programmability: Yes – braking, soft start, throttle range, and five timing profiles
- Safety Features: Safe power-arm mode and auto shutdown on signal loss
Connectivity and Compatibility
- Input Connector: EC3 – compatible with high-discharge LiPo battery packs
- Motor Leads: 3.5mm bullet connectors – secure motor connectivity
- Aircraft Compatibility: Carbon-Z Cub SS, Carbon-Z Cessna 150, and similar .40–.60 size aircraft
What’s in the Box
- 1 × E-flite P-EFLA1060B 60A Brushless ESC V2
What You Require / What You Will Need
- Compatible brushless motor – matched to 60A ESC rating
- 3–6S LiPo or 9–18 cell NiMH/NiCd battery – required for operation
- EC3 battery connectors – for secure power delivery
Sold Separately
- DYNC0029 adapter – required for Carbon-Z Cub SS and Cessna 150 replacements
We want to make sure your delivery goes smoothly, so here are some important details about our service:
- For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
- Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
- Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
- If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
- We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
- As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
- If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
- For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.
