Product Description of Castle M-CC060-0083-00 2028-800kV sensored brushless motor 

The Castle M-CC060-0083-00 2028-800kV sensored brushless motor for 1/6 scale vehicles is engineered to deliver brute-force torque, ultra-efficient power conversion, and long-duration performance for large-scale RC builds. Featuring a refined 4-pole, 12-slot inrunner architecture, this motor integrates dual sensor ports, high-strength Kevlar reinforcement, and proprietary low-resistance winding to maintain peak output under extreme throttle conditions. With factory-installed 10AWG wire and 6.5mm bullet connectors, the Castle M-CC060-0083-00 4-pole motor with 10AWG wire and 6.5mm bullet connectors is optimized for secure, high-current delivery in demanding 8S LiPo setups.

Key features of the Castle M-CC060-0083-00 2028-800kV motor

• Improved 4-pole, 12-slot design – enhances magnetic efficiency and reduces heat buildup
• Dual sensor ports – allow flexible ESC placement and optimal signal routing
• Kevlar-wrapped rotor – reinforces structural integrity under high-RPM stress
• High-temperature neodymium magnets – resist thermal degradation during extended use
• Factory-installed 10AWG wire – supports high-current flow with minimal resistance
• Presoldered 6.5mm bullet connectors – ensure secure fitment and fast installation
• Low-resistance stator – improves cooling and extends runtime
• Ultra-efficient sensorless mode – maximizes performance during sustained operation

How does the dual sensor port configuration benefit large-scale builds?

The Castle M-CC060-0083-00 sensored inrunner motor with dual sensor ports and Kevlar wrap features two sensor ports to accommodate flexible ESC positioning in oversized chassis layouts. This dual-port setup ensures clean signal routing and consistent rotor alignment, even in complex installations. Whether mounted forward or rearward, the motor maintains precise timing and throttle response, eliminating startup hesitation and improving drivability across all terrain types.

What makes this motor ideal for heavy throttle and extended runtime?

The Castle 800kV motor for heavy throttle and extended runtime in 1/6 scale builds is built to withstand the demands of prolonged high-load operation. Its proprietary winding techniques minimize electrical resistance, allowing the motor to run cooler and more efficiently. Oversized NMB bearings and a vibration dampening system further enhance durability, while the Kevlar-wrapped rotor maintains integrity under aggressive acceleration. This combination of features ensures consistent performance and longer run times, even under extreme conditions.

How does the stator design improve thermal efficiency?

The Castle 2028 motor with low-resistance stator and high-efficiency winding uses precision-engineered copper windings to reduce internal resistance. This design minimizes heat generation, allowing the motor to maintain optimal operating temperatures during extended use. The result is a cooler, more reliable powerplant that delivers sustained torque without thermal fade—ideal for large-scale RC conversions and competitive off-road applications.

Why is this motor the best upgrade for 1/6 scale torque delivery?

The Castle M-CC060-0083-00 2028-800kV sensored brushless motor for 1/6 scale vehicles combines brute-force output with refined engineering to deliver unmatched torque and responsiveness. Its 4-pole configuration enhances low-speed control, while the dual-mode operation allows users to switch between sensored startup and ultra-efficient sensorless drive. With reinforced internals and high-current connectivity, the motor is the best Castle upgrade for large-scale torque and ultra-efficient sensorless drive.

For RC enthusiasts seeking a rebuildable motor with advanced sensor integration and high-efficiency architecture, the affordable Castle 2028-800kV motor with SmartSense startup and rebuildable design offers exceptional value and performance. Buy Castle M-CC060-0083-00 sensored motor for 8S LiPo 1/6 scale RC conversions.

Technical Specifications of Castle M-CC060-0083-00 2028-800kV sensored brushless motor 

Brand, Model and Product Type 

• Brand: Castle Creations
• Model: M-CC060-0083-00
• Product Type: Castle M-CC060-0083-00 2028-800kV sensored brushless motor for 1/6 scale vehicles, Castle M-CC060-0083-00 4-pole motor with 10AWG wire and 6.5mm bullet connectors, Castle M-CC060-0083-00 sensored inrunner motor with dual sensor ports and Kevlar wrap, Castle M-CC060-0083-00 with oversized NMB bearings and vibration dampening, Castle 2028 motor with low-resistance stator and high-efficiency winding, Castle 800kV motor for heavy throttle and extended runtime in 1/6 scale builds

Dimensions

• Wire Gauge: 10AWG – pre-soldered for high-current delivery and minimal resistance
• Connector Size: 6.5 mm bullet – tailored for secure fitment in 1/6 scale platforms

Motor Architecture and Performance

• Motor Type: Brushless – engineered for high efficiency and reduced maintenance
• Motor Design: Inrunner – enclosed rotor configuration for consistent torque output
• Number of Poles: 4 – optimized for torque-rich launches and smooth acceleration
• Slot Configuration: 12-slot – enhances magnetic efficiency and reduces heat buildup
• RPM/Volt (Kv): 800 kV – tuned for large-scale torque and extended runtime
• Operating Modes: Sensored and ultra-efficient sensorless – selectable based on ESC pairing

Materials and Build Quality

• Rotor Reinforcement: High-strength Kevlar wrap – protects rotor integrity under extreme throttle
• Magnet Composition: High-temperature neodymium sintered magnets – resist thermal degradation
• Bearings: Castle M-CC060-0083-00 with oversized NMB bearings and vibration dampening – ensures long-term durability and smooth operation
• Stator Assembly: Castle 2028 motor with low-resistance stator and high-efficiency winding – supports cooler operation and sustained performance

Connectivity and Compatibility

• Sensor Ports: Dual – allows flexible installation and optimal ESC alignment
• ESC Compatibility: Designed to pair with Castle Mamba Monster X 8S, 33.6V ESC

System Features

• Cooling Efficiency: Internal architecture minimizes heat generation during extended use
• Design Integrity: Component selection verified through internal testing for maximum reliability
• Visual Design: Updated sleek exterior – engineered to perform and impress

What’s in the Box

• (1) Castle 2028-800kV 4-Pole Sensored Brushless Motor – model M-CC060-0083-00

What You Require

• (1) Compatible Brushless Electronic Speed Control – must support sensored operation

We want to make sure your delivery goes smoothly, so here are some important details about our service:

• For orders above £120, we offer delivery to most mainland UK addresses. For orders under £120, we can still deliver to Northern Ireland and the outlying isles, as long as the item can be sent by Royal Mail, weighs less than 30kg, and fits within 61cm × 46cm × 46cm. Some highland and remote areas may carry an extra delivery charge as couriers often apply surcharges in these locations. If you live in one of these areas, feel free to contact us before ordering so we can confirm the delivery options and costs for you.
• Most of our products include delivery in the price. If your order is under £90, a small delivery fee will apply but do not worry this will always be clearly shown at checkout before you complete your purchase.
• Depending on what you choose at checkout, your order will usually be delivered either the next working day or within 2 working days. For next day delivery please place your order before 2:00pm. Orders are dispatched Monday to Friday only. Some items may take a little longer and if that is the case we will always show the expected delivery time on the product page.
• If your order includes items with different dispatch times we will normally wait and send everything together once all items are in stock. If one of the items is going to take a while we will give you the choice either wait for everything to arrive or let us send the available items now and deliver the rest later. It is up to you.
• We use trusted delivery partners to make sure your order gets to you safely and on time. We use DPD for next working day deliveries and Royal Mail for the 2 day option.
• As soon as your order is on its way we will send you a tracking number by email. If you provide your mobile number at checkout we will also send delivery updates straight to your phone so you can keep an eye on progress.
• If a product is marked as "Dispatched within 3 working days" delivery usually takes around 3 to 5 working days from when your order is placed.
• For customers in Inverness and other parts of the Scottish Highlands deliveries can take up to 2 working days even if you select next day delivery as couriers do not currently offer a guaranteed next day service to those areas.