The Spektrum P-SPMXSE8010RX 80A 2-in-1 ESC and SLT receiver with 3S LiPo support and Smart telemetry is a compact, factory-integrated solution designed to simplify electronics setup in 1/10-scale RC vehicles. Engineered for ARRMA 3S BLX platforms such as Granite and Senton, this unit combines a high-efficiency 80A brushless ESC with a reliable 2.4GHz SLT receiver in a single waterproof housing. The result is reduced wiring complexity, faster installation, and seamless compatibility with Spektrum SLT3 and DX3 SMART transmitters. Whether you're bashing through mud or racing across gravel, this ESC/receiver combo delivers dependable control and real-time telemetry feedback without the need for external sensors.
Key features of the Spektrum P-SPMXSE8010RX 80A 2-in-1 ESC and SLT receiver
- Integrated 2-in-1 design – combines ESC and receiver to reduce space and simplify wiring
- Smart telemetry support – transmits battery voltage, ESC temperature, and motor RPM to compatible transmitters
- SLT protocol compatibility – works with SLT3 and DX3 SMART radios for reliable 2.4GHz control
- Waterproof housing – sealed design for all-weather bashing and off-road durability
- Multiple protection systems – includes over-current, thermal shutdown, low-voltage cutoff, and failsafe logic
- Switching BEC – delivers 5V at 4A for stable servo and receiver power
- Factory fitment – designed for ARRMA Granite and Senton 3S BLX platforms with IC5 input and 4mm motor bullets
How does the 2-in-1 architecture improve installation and reliability?
The Spektrum P-SPMXSE8010RX compact ESC/receiver combo for ARRMA 3S BLX platforms with IC5 input eliminates the need for separate receiver and ESC units, reducing clutter and installation time. By integrating both components into a single enclosure, users benefit from simplified wiring and fewer connection points—minimizing potential failure areas. This design is especially beneficial for hobbyists seeking plug-and-play convenience without sacrificing performance. The compact footprint also frees up chassis space, making it easier to route wires and maintain a clean build layout.
What telemetry data does the Smart system provide?
The Smart ESC/receiver combo for 1/10-scale bashers with telemetry feedback and SLT3/DX3 compatibility transmits key performance metrics directly to your Spektrum transmitter. Through the throttle channel, users receive real-time updates on battery voltage, ESC temperature, and motor RPM—without the need for external sensors or modules. This data allows drivers to monitor system health during operation, make informed adjustments, and avoid potential damage from overheating or low voltage. When paired with DX3 SMART radios, telemetry is displayed clearly on-screen, enhancing situational awareness and control.
Is the Spektrum P-SPMXSE8010RX suitable for all-weather use?
Yes. The Spektrum P-SPMXSE8010RX waterproof brushless ESC with integrated SLT receiver and 4mm motor bullets features a sealed housing that protects internal electronics from moisture, dust, and debris. Whether you're driving through puddles, mud, or snow, this ESC/receiver combo is built to withstand harsh conditions. The waterproof design ensures consistent performance across varied terrain, making it ideal for bashers who demand durability and reliability in unpredictable environments.
How does the switching BEC enhance power delivery?
The Spektrum P-SPMXSE8010RX with 5V switching BEC, 4A output, and factory fitment for ARRMA Granite and Senton includes a built-in BEC that supplies stable voltage to servos and receivers. With a 5V output and 4A continuous current capacity, the switching BEC ensures that high-torque servos receive consistent power even under load. This is particularly important for off-road platforms where rapid steering and throttle inputs demand reliable electrical support. The efficient switching design also reduces heat buildup, contributing to overall system longevity.
What protection features are built into the Spektrum P-SPMXSE8010RX?
The high-efficiency 80A ESC with waterproof housing, failsafe logic, and simplified plug-and-play wiring includes a comprehensive set of safety protocols. Over-current protection prevents damage during electrical surges, while thermal shutdown safeguards against overheating. The programmable low-voltage cutoff protects your 3S LiPo battery from over-discharge, and failsafe logic ensures controlled shutdown in the event of signal loss. These features work together to maintain system integrity and provide peace of mind during high-stress driving scenarios.
Why is this ESC/receiver combo ideal for ARRMA 3S BLX vehicles?
The Spektrum digital ESC with 80A output, 4mm motor leads, and integrated 2.4GHz receiver is factory-installed in select ARRMA 1/10-scale models including Granite and Senton. Its IC5 input connector and 4mm motor bullets match the standard hardware used in these platforms, ensuring seamless compatibility and optimal performance. The 80A output is well-suited for 3S LiPo setups, delivering consistent power for bashing, racing, and trail running. For users seeking a reliable, compact, and telemetry-enabled solution, this ESC/receiver combo offers a streamlined upgrade path with minimal setup required.
Buy Spektrum P-SPMXSE8010RX 80A 2-in-1 ESC/receiver for ARRMA 3S BLX vehicles and 1/10-scale RC trucks.
Brand, Model and Product Type
- Brand: Spektrum
- Model: P-SPMXSE8010RX
- Product Type: Spektrum P-SPMXSE8010RX 80A 2-in-1 ESC and SLT receiver with 3S LiPo support and Smart telemetry, Spektrum P-SPMXSE8010RX waterproof brushless ESC with integrated SLT receiver and 4mm motor bullets, Spektrum P-SPMXSE8010RX compact ESC/receiver combo for ARRMA 3S BLX platforms with IC5 input, Spektrum P-SPMXSE8010RX with 5V switching BEC, 4A output, and factory fitment for ARRMA Granite and Senton, Smart ESC/receiver combo for 1/10-scale bashers with telemetry feedback and SLT3/DX3 compatibility
Electrical and Performance Specifications
- ESC Type: Brushless – supports high-efficiency motor control for 3S LiPo systems
- Application: 1/10-scale RC vehicles – ideal for ARRMA Granite, Senton, and Big Rock 3S BLX models
- Input Voltage: 8.4V – compatible with 3S LiPo battery configurations
- Maximum Continuous Current: 80A – delivers consistent power for entry-level and mid-tier bashers
- Motor Output Lead: 4mm bullet connectors – secure and efficient connection to brushless motors
- Battery Connector: IC5 – high heat-resistant input, compatible with Spektrum Smart LiPo batteries
Receiver and Protocol Integration
- Receiver Type: Integrated SLT – combines ESC and receiver in one unit for simplified wiring
- Protocol Compatibility: SLT3 and DX3 SMART – supports reliable 2.4GHz control with minimal setup
- Telemetry Channel: Throttle – transmits data without external sensors
Telemetry and Smart Technology
- Telemetry Support: Yes – provides battery voltage, ESC temperature, and motor RPM feedback
- Smart Compatibility: Compatible with Spektrum Smart transmitters – enables real-time diagnostics
BEC Specifications
- BEC Type: Switching – efficient power delivery with reduced heat generation
- BEC Voltage: 5V – suitable for standard servo and receiver configurations
- BEC Continuous Current: 4A – supports high-torque servo systems and stable receiver power
Protection and Safety Features
- Waterproof Rating: Yes – sealed housing for all-weather operation including mud, snow, and splashes
- Failsafe Protection: Yes – maintains control during signal loss or system fault
- Thermal Protection: Yes – prevents overheating during extended use
- Overload Protection: Yes – safeguards against electrical surges
- Low-Voltage Cutoff: Yes – protects battery from over-discharge
What’s in the Box
- 1 × 80A Brushless 2-in-1 ESC / SLT Receiver
What You Require / What You Will Need
- 1 × Spektrum SLT3 or DX3 SMART Transmitter
- 1 × Spektrum Smart Technology LiPo Battery